Range Rover Sport (LS) V8-4.2L SC (2006)
/v8-4.2l_sc/Page-1916002.png)
Installation
1. Make sure the brake disc and hub mating surfaces are clean.
2. Install the brake disc.
^
Tighten the Torx screw to 35 Nm (26 ft. lbs.).
3. Install the brake caliper anchor plate.
4. Adjust the parking brake.
5. Install fuse number 8 into the BJB.
6. Install the wheel and tire.
^
Tighten the wheel nuts to 140 Nm (103 ft. lbs.).
