Range Rover Sport (LS) V8-4.2L SC (2006)
/v8-4.2l_sc/Page-1438002.png)
5. Remove the supercharger outlet pipe.
^
Remove the 8 bolts.
^
Disconnect the vacuum line.
^
Release the clip.
^
Discard the gasket.
CAUTION: Before disconnecting or removing the components, ensure the area around the joint faces and connections are clean. Plug
open connections to prevent contamination.
6. Remove the charge air cooler intake ducts.
^
Remove the 4 nuts.
NOTE: Do not disassemble further if the component is removed for access only.
Installation
1. Install the charge air cooler intake ducts.
^
Clean the component mating faces.
^
Tighten the nuts to 10 Nm (7 ft. lbs.).
