Range Rover Sport (LS) V8-4.2L SC (2006)
2. Install the supercharger outlet pipe.
^
Clean the component mating faces.
^
Install a new gasket.
^
Tighten the bolts to 10 Nm (7 ft. lbs.).
^
Secure the hose with the clip.
^
Connect the vacuum line.
3. Install the throttle body intake.
^
Clean the component mating faces.
^
Align the bushing.
^
Secure the clip.
^
Connect the breather line.
4. Install the wiring harness support bracket.
^
Tighten the bolts to 10 Nm (7 ft. lbs.).
5. Install the air intake resonator.
6. Connect the battery ground cable.