Range Rover Sport (LS) V8-4.2L SC (2006)
Air Spring: Service and Repair
Front Suspension
Front Shock Absorber and Air Spring Assembly
Service Repair No - 60.21.01.99
Removal
NOTE: Only the air spring being removed needs to be depressurized.
1. WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
Raise and support the vehicle.
2. Remove the fender splash shield.
3. Using T4, depressurize the air suspension.
4. Disconnect the shock absorber and air spring assembly from the lower arm.
^
Remove the nut and bolt.
5. Release the heat shield for access to the shock absorber and air spring assembly upper mounting inner nut.
^
Remove the nut and two bolts.
6. Release the shock absorber and air spring assembly.
^
Remove the three retaining nuts.
7. CAUTION: Always plug any open connections to prevent contamination.
Release the shock absorber and air spring assembly and disconnect the air line.