Range Rover Sport (LS) V8-4.2L SC (2006)
9. Install the front half of the transfer case.
^
Evenly tighten the 2 Torx bolts shown to 35 Nm (26 lb.ft).
10. With assistance, release the transfer case and secure with its transmission mating face down on a flat surface.
11. Tighten the remaining Torx bolts to 35 Nm (26 lb.ft).
12. Install the shift motor.
^
Clean the components.
^
Tighten the Torx bolts to 25 Nm (18 lb.ft).
13. With assistance, release the transfer case.
^
Remove the 2 bolts.
14. Install the transfer case.
15. Refill the transfer case with the recommended fluid.
16. Connect the battery ground cable.