Range Rover Sport (LS) V8-4.4L (2009)
/v8-4.4l/Page-1652001.png)
Power Steering Line/Hose: Service and Repair
Power Steering Pump to Steering Gear Pressure Line
Removal
1. Raise and support the vehicle.
2. Remove the front RH splash shield.
^
Remove the 4 clips.
3. Remove the front LH fender splash shield.
4. Remove the radiator access panel.
^
Remove the 4 bolts.
5. CAUTION: Always plug any open connections to prevent contamination.
Disconnect the high pressure line from the power steering pump.
^
Loosen and release the power steering pump line.
^
Allow the fluid to drain into a container.
^
Remove and discard the 2 sealing washers.
6. Release the power steering line support bracket.
^
Remove the nut.
^
Release the hose.
