Range Rover Classic
FRONT SUSPENSION
1
SPECIFICATIONS, TORQUE
TORQUE VALUES
NOTE: Torque wrenches should be regularly checked for accuracy to ensure that all fixings are
tightened to the correct torque.
Nm
Anti-roll bar front
- Strap nyloc nuts
30
..............................................................................
- Ball link self lock nut
68
........................................................................
- Castellated nut
40
................................................................................
Drag link to axle
40
.........................................................................................
Securing ring for mounting turret
14
...............................................................
Radius arm to chassis
175
...............................................................................
Panhard rod mounting arm to chassis
88
.......................................................
Panhard rod to axle
88
....................................................................................
Panhard rod to mounting bracket
88
...............................................................
Tie bar to Panhard rod
110
..............................................................................
Radius arm to axle (front only)
200
..................................................................
Torque values below are for all screws and bolts used except for those that are specified otherwise.
METRIC
Nm
M5
6
......................................................................................................
M6
9
......................................................................................................
M8
25
.....................................................................................................
M10
45
...................................................................................................
M12
90
...................................................................................................
M14
105
..................................................................................................
M16
180
..................................................................................................
UNC / UNF
1/4
9
......................................................................................................
5/16
24
...................................................................................................
3/8
39
.....................................................................................................
7/16
78
...................................................................................................
1/2
90
.....................................................................................................
5/8
136
....................................................................................................