Engine Overhaul Manual v8 4.0 4.6
INFORMATION
4
TORQUE WRENCH SETTINGS
SEALANTS
A range of sealants is used when overhauling the engine, the sealant application, together with the appropriate part
numbers is listed below.
Timing cover bolts
STC 50552
. . . . . . . . . . . . . . . . . . . . . . . . . . .
Sump to cylinder block - Early engines fitted with
pressed steel sump
STC 50550
. . . . . . . . . . . . . . . . . . . . . . . . . .
Sump to cylinder block - cruciform seals - Later
engines fitted with cast alloy sump
STC 50550
. . . . . . . . . . . . . .
Sump to front cover and rear main bearing cap
- Later engines fitted with cast alloy sump
STC 50550
. . . . . . . . .
Rear main bearing cap to cylinder block mating
face
STC 50550
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Oil pump cover plate screws and bolt
STC 50552
. . . . . . . . . . . .
Cylinder head threaded core plugs
STC 50552
. . . . . . . . . . . . . .