ES 300 V6-3.0L (1MZ-FE) (1997)
/Page-1114003.png)
ABS Actuator Checker
(b) Turn the selector switch of the Actuator checker to "FRONT RH" position.
(c) Push and hold in the MOTOR switch for a few seconds.
Operation Check
(d) Depress the Brake Pedal and hold it until step (g) is completed.
(e) Push the POWER SWITCH, and check that the brake pedal does not go down.
CAUTION: Do not keep the POWER SWITCH pushed down for more than 10 seconds.
(f) Release the switch, and check that the pedal goes down.
Operation Check
(g) Push and hold in the MOTOR switch for a few seconds, and check that the pedal returns.
(h) Release the Brake Pedal.
Operation Check
(i) Push and hold in the MOTOR switch for a few seconds.
(j) Depress the Brake Pedal and hold it for about 15 seconds. As you hold the pedal down, push the MOTOR switch for a few seconds. Check
