ES 330 V6-3.3L (3MZ-FE) (2004)
6. REMOVE AIR CLEANER CAP SUB-ASSY
7. REMOVE EMISSION CONTROL VALVE SET
8. REMOVE INTAKE AIR SURGE TANK
9. REMOVE IGNITION COIL ASSY
10. REMOVE CYLINDER HEAD COVER SUB-ASSY
11. REMOVE FRONT FENDER APRON SEAL RH
12. REMOVE V (COOLER COMPRESSOR TO CRANKSHAFT PULLEY) BELT NO.1
13. REMOVE VANE PUMP V BELT
14. REMOVE ENGINE MOVING CONTROL ROD
15. REMOVE ENGINE MOUNTING STAY NO.2 RH
16. REMOVE GENERATOR BRACKET NO.2
17. REMOVE CRANKSHAFT PULLEY
SST 09213-54015 (91651-60855), 09330-00021, 09950-50013 (09951-05010, 09952-05010, 09953-05020, 09954-05031)
18. REMOVE TIMING BELT NO.1 COVER
19. REMOVE TIMING BELT NO.2 COVER
20. REMOVE ENGINE MOUNTING BRACKET RH
21. REMOVE TIMING BELT GUIDE NO.2
22. REMOVE TIMING BELT
23. REMOVE TIMING BELT IDLER SUB-ASSY NO.2
24. REMOVE CAMSHAFT TIMING PULLEY
a. Using SST, remove the bolt and RH timing pulley.
SST 09960-10010 (09962-01000, 09963-01000), 09249-63010
b. Using SST, remove the bolt and LH timing pulley.
SST 09960-10010 (09962-01000, 09963-01000)
HINT: Arrange the camshaft timing pulleys (RH and LH sides) so that they can be returned to the original locations when reassembling.
25. REMOVE TIMING BELT NO.3 COVER
a. Disconnect the 3 engine wire harness clamps from the timing belt No. 3 cover.
b. Remove the 6 bolts and timing belt cover.