ES 330 V6-3.3L (3MZ-FE) (2004)
a. Using hexagon wrench 10 mm (0.39 in.), remove the cap and filter from the modulator.
b. Remove the 2 O-rings from the cap.
c. Using a needle nose pliers, remove the cooler drier.
8. INSTALL COOLER DRYER
a. Using a needle nose pliers, install the cooler drier.
b. Install 2 new O-rings to the cap.
c. Sufficiently apply compressor oil to the fit surfaces of the O-ring and the cap.
Compressor oil: ND-OIL 8 or equivalent