ES 330 V6-3.3L (3MZ-FE) (2004)
29. REMOVE COOLER EVAPORATOR SUB-ASSY NO.1
a. Release the fitting claw, remove the 3 screws and air duct sub-assy.
b. Release the 4 fitting claws, remove the air duct sub-assy.
c. Remove the 11 screws and heater case LH.
d. Remove the cooler evaporator sub-assy No.1 from the heater case RH.
e. Remove the 2 O-rings from the cooler evaporator sub-assy No.1.
30. INSTALL COOLER EVAPORATOR SUB-ASSY NO.1