ES 330 V6-3.3L (3MZ-FE) (2004)
a. Remove the bolt and disconnect the rear flexible hose.
b. Remove the 2 bolts and rear disc brake caliper assy LH.
c. Support the rear disc brake caliper assy LH securely.
3. REMOVE REAR DISC
4. DISCONNECT SKID CONTROL SENSOR WIRE
5. REMOVE REAR AXLE HUB & BEARING ASSY LH
a. Remove the 4 bolts and rear axle hub & bearing assy LH.
6. REMOVE SKID CONTROL SENSOR
7. INSTALL SKID CONTROL SENSOR
8. INSTALL REAR AXLE HUB & BEARING ASSY LH
a. Install the rear axle hub & bearing assy LH with the 4 bolts.
Torque: 80 Nm (816 kgf-cm, 59 ft. lbs.)
9. INSTALL SKID CONTROL SENSOR WIRE