ES 330 V6-3.3L (3MZ-FE) (2004)
The inspection procedure is shown in the table. This table permits an efficient and accurate troubleshooting using the diagnostic trouble codes displayed
in the diagnostic trouble code check. Proceed with troubleshooting in accordance with the inspection procedure given in the diagnostic chart
corresponding to the diagnostic trouble codes displayed. The Supplemental Restraint System diagnostic trouble code chart is shown as an example.
Electronic Circuit Inspection Procedure
ELECTRONIC CIRCUIT INSPECTION PROCEDURE
1. BASIC INSPECTION
a. RESISTANCE MEASURING CONDITION OF ELECTRONIC PARTS
1. Unless stated, all resistance is measured at an ambient temperature of 20 °C (68 °F). Because the resistance may be outside the
specifications if measured at high temperatures immediately after the vehicle has been running, measurements should be made when the
engine has cooled down.