ES 330 V6-3.3L (3MZ-FE) (2004)
7. REMOVE VAPOR PRESSURE SENSOR ASSY
(a) Remove the cover.
(b) Remove the tube joint clip, then pull out the vapor pressure sensor.
8. INSTALL VAPOR PRESSURE SENSOR ASSY
(a) Install the vapor pressure sensor with the tube joint clip.
NOTICE:
-
Check the connected part for scratch or foreign objects.
-
Check that the vapor pressure sensor is inserted securely.
-
Check that the tube joint clip is on the collar of the vapor pressure sensor.
-
After installing the tube joint clip, check that the vapor pressure sensor has not been pulled off.
(b) Install the cover.
9. INSTALL FUEL TANK VENT TUBE SET PLATE
(a) Align the mark of the fuel tank vent tube set plate with the fuel suction tube wi pump & gauge.
(b) Install the fuel tank vent tube set plate with the 8 bolts.
Torque: 5.9 N-m (60 kgf-cm, 52 in.-lbf)