ES 330 V6-3.3L (3MZ-FE) (2004)
![background image](/lexus/es_330/v6-3.3l_(3mz-fe)/Page-458001.png)
Engine Control Module: Component Tests and General Diagnostics
ECM POWER SOURCE CIRCUIT
CIRCUIT DESCRIPTION
When the ignition switch is turned to ON, battery voltage is applied to terminal IGSW of the ECM. The ECM "MREL" output signal causes current to
flow to the coil, closing the contacts of the EFI relay and supplying power to terminal +B of the ECM.
If the ignition switch is turned to OFF, the ECM holds the EFI relay ON for a maximum of 2 seconds to allow for the initial setting of the throttle valve.
Wiring Diagram