ES 330 V6-3.3L (3MZ-FE) (2004)
Bolt:
L: 35.0 mm (1.387 in.)
M: 6.0 mm (0.236 in.)
Pitch: 1.0 mm (0.039 in.)
NOTE:
-
Tighten the bolts by hand until the bolts become difficult to turn.
-
Do not tighten the bolts too much.
2. Connect the connectors of the SST to the horn button assy connectors.
SST 09082-00802 (09082-10801, 09082-30801)
3. Using 3 wire harness, wind the wire harness at least 2 times each around the bolts installed on the left and right sides of the horn button assy.
CAUTION:
-
Tightly wind the wire harness around the bolts so that there is no slack.
-
If there is slack in the wire harness, the horn button assy may come loose due to the shock when the air bag is deployed. This is highly
dangerous.