ES 330 V6-3.3L (3MZ-FE) (2004)
Clockspring Assembly / Spiral Cable: Service and Repair
Removal and Installation
Horn Button Assembly
HORN BUTTON ASSEMBLY
REPLACEMENT
1. OBSERVE AIR BAG SYSTEMS SERVICE PRECAUTIONS
2. SEPARATE BATTERY NEGATIVE TERMINAL
3. REMOVE STEERING WHEEL COVER LOWER NO.2
4. REMOVE CONNECTOR COVER
5. REMOVE HORN BUTTON ASSY
a. Place the front wheels facing straight ahead.
b. Using a torx socket wrench (T30), loosen the 2 torx screws until the groove along the screw circumference catches on the screw case.
c. Pull out the wheel pad from the horn button assy.
d. Using a screwdriver, disconnect the airbag connectors.
e. Remove the horn button assy.
6. INSPECT HORN BUTTON ASSY