ES 330 V6-3.3L (3MZ-FE) (2004)
/Page-237001.png)
Acceleration Sensor: Service and Repair
Rear
REPLACEMENT
1. REMOVE REAR SEAT CUSHION ASSY
2. REMOVE REAR SEAT BACK ASSY
3. REMOVE ROOF SIDE GARNISH INNER RH
4. REMOVE ACCELERATION SENSOR
a. Disconnect the acceleration sensor connector.
b. Remove the bolt and acceleration sensor from the side pillar RH.
5. INSTALL ACCELERATION SENSOR
a. Install the acceleration sensor with the bolt.
Torque: 7.8 Nm (80 kgf-cm, 69 inch lbs.)
b. Connect the acceleration sensor connector.
