ES 330 V6-3.3L (3MZ-FE) (2004)
Torque: 4.6 Nm (47 kgf.cm, 41 in.lbf)
17. INSTALL GENERATOR PULLEY
SST 09820-63010 09820-06010, 09820-06020.
a. Install the generator pulley to the rotor shaft by tightening the pulley nut by hand.
b. Hold SST (1-A) with a torque wrench, and tighten SST (1-B) clockwise to the specified torque.
Torque: 39 Nm (400 kgf.cm, 29 ft.lbf)
NOTE: Check that SST is secured to the rotor shaft.