ES 330 V6-3.3L (3MZ-FE) (2004)
Part 2 Of 2
OVERHAUL
NOTICE:
^
When using a vise, do not over tighten.
^
When installing, coat the parts indicated by the arrows with power steering fluid.
1. REMOVE FRONT WHEEL RH
2. DRAIN POWER STEERING FLUID
3. REMOVE FRONT FENDER LINER RH
4. REMOVE FRONT FENDER APRON SEAL RH
5. DISCONNECT OIL RESERVOIR TO PUMP HOSE NO. 1
a. Remove the clip and disconnect the oil reservoir to pump hose No. 1.
NOTICE: Take care not to spill fluid on the V belt.
6. REMOVE POWER STEERING OIL PRESSURE SWITCH
a. Disconnect the connector.