ES 330 V6-3.3L (3MZ-FE) (2004)
Torque:
Type A Vane Pump: 43 Nm (438 kgf-cm, 32 ft. lbs.)
Type B Vane Pump: 44 Nm (449 kgf-cm, 32 ft. lbs.)
32. INSTALL VANE PUMP SHAFT (TYPE A VANE PUMP)
a. Coat inside bushing surface of the vane pump housing front with power steering fluid.
b. Gradually insert the vane pump shaft from the pulley side.
NOTICE: Do not damage the vane pump housing oil seal lip in the vane pump housing front.
33. INSTALL W/PULLEY SHAFT SUB-ASSY (TYPE B VANE PUMP)
a. Coat inside bushing surface of the vane pump housing front with power steering fluid.
b. Gradually insert the w/pulley shaft sub-assy from the pulley side.
NOTICE: Do not damage the vane pump housing oil seal lip in the vane pump housing front.
34. INSTALL VANE PUMP ROTOR
a. Install the vane pump rotor.
b. Using a snap ring expander, install a new vane pump shaft snap ring.
35. INSTALL VANE PUMP CAM RING
a. Align the holes of the vane pump cam ring with 2 straight pins, and install the vane pump cam ring with inscribed mark facing outward.
b. Coat 10 vane pump plates with power steering fluid.