ES 330 V6-3.3L (3MZ-FE) (2004)
11. REMOVE REAR SUSPENSION ARM ASSY NO. 1 LH
a. Lower the rear suspension member.
b. Remove the bolt, nut and lower suspension arm No. 1.
12. INSTALL REAR SUSPENSION ARM ASSY NO. 1 LH
a. Install the lower suspension No. 1 with the bolt, nut and temporarily tighten the bolt.
b. Set suspension arm in the position shown in the illustration and fully tighten the bolt.
Torque: 100 Nm (1,020 kgf-cm, 74 ft. lbs.)
HINT: Install the lower suspension No. 1 so that the bracket leans toward the front of the vehicle, as shown in illustration.
13. INSTALL REAR SUSPENSION MEMBER SUB-ASSY
a. Support the rear suspension member with a jack.
b. Install the rear suspension member with the 4 nuts, 2 bolts and 4 retainers.
Torque:
A, B: 55 Nm (561 kgf-cm, 41 ft. lbs.)
C: 38 Nm (387 kgf-cm, 28 ft. lbs.)