ES 350 V6-3.5L (2GR-FE) (2007)
3. Check that the air bubble is within the red frame on the level.
OK: The air bubble is within the red frame on the level.
If the bubble is not indicated with the red frame, use a hexagon wrench to adjust screw A until the air bubble is within the red frame.
HINT:
-
The adjustable range indicated with the red frame on the level is + - 0.2°.
-
The target angle is +0.2° (upward angle of 0.2°).
c. Adjust the reflector height.
1. Adjust the reflector so that the center of the SST reflector is the same height as the millimeter wave radar sensor.
SST 09870-60000 (09870-60010, 09870- 60040)
HINT: Prepare a 10 m (32.81 ft) string, a string with a sharp-pointed weight (plumb bob), and a 5 m (16.41 ft) tape measure.