ES 350 V6-3.5L (2GR-FE) (2007)
d. Pull the piano wire and scrape off the double-sided tape that holds the name plate to the vehicle body.
NOTICE:
-
If reusing the name plate, take care not to damage the name plate.
-
Be careful not to damage the vehicle body.
e. Remove the name plate.
INSTALLATION
HINT: When installing the symbol emblem or name plate, heat the vehicle body and symbol emblem or name plate using a heat light.
NOTICE: Do not heat the vehicle body and name plate excessively.
1. INSTALL SYMBOL EMBLEM
a. Clean the vehicle body surface.
1. Using a heat light, heat the vehicle body surface.
2. Remove the double-sided tape from the vehicle body.
3. Wipe off any tape adhesive residue with cleaner.
b. Clean the symbol emblem. (If reusing the symbol emblem)
1. Using a heat light, heat the symbol emblem.
2. Remove the double-sided tape from the symbol emblem.
3. Wipe off any tape adhesive residue with cleaner.
4. Apply new double-sided tape to the symbol emblem.
c. Install the symbol emblem.
1. Using a heat light, heat the vehicle body and symbol emblem.
2. Remove the release paper from the symbol emblem.
HINT: After removing the release paper, keep the exposed adhesive free from foreign matter.
3. Install the symbol emblem.
2. INSTALL NO. 7 LUGGAGE COMPARTMENT DOOR NAME PLATE
a. Clean the vehicle body surface.
1. Using a heat light, heat the vehicle body surface.
2. Remove the double-sided tape from the vehicle body.
3. Wipe off any tape adhesive residue with cleaner.