ES 350 V6-3.5L (2GR-FE) (2007)
a. Disengage the 2 claws and separate the bulb holder from the vanity light assembly as shown in the illustration.
b. Disengage the claw and remove the vanity light assembly.
HINT: Use the same procedure to remove the light on the other side.
79. REMOVE NO. 1 ROOF WIRE (for Standard)
a. Turn the visor connectors clockwise approximately 90° and separate the connectors from the roof headlining assembly.
b. Remove the adhesive tape from the roof headlining assembly.
c. Remove the No. 1 roof wire from the roof headlining assembly.
d. Remove the double-sided tape from the roof headlining assembly.
80. REMOVE NO. 1 ROOF WIRE (for Glass Roof)
a. Turn the visor connectors clockwise approximately 90° and separate the connectors from the roof headlining assembly.
b. Remove the adhesive tape from the roof headlining assembly.
c. Remove the No. 1 roof wire from the roof headlining assembly.
d. Remove the double-sided tape from the roof headlining assembly.