ES 350 V6-3.5L (2GR-FE) (2007)
5. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY
6. REMOVE FRONT DOOR INNER GLASS WEATHERSTRIP
7. REMOVE FRONT NO. 1 SPEAKER ASSEMBLY
8. REMOVE FRONT NO. 1 DOOR TRIM BRACKET
9. REMOVE FRONT DOOR SERVICE HOLE COVER
10. REMOVE FRONT DOOR GLASS SUB-ASSEMBLY
11. REMOVE FRONT DOOR REAR LOWER FRAME SUB-ASSEMBLY
12. REMOVE FRONT DOOR OUTSIDE HANDLE COVER
13. REMOVE FRONT DOOR LOCK ASSEMBLY
a. Using a "TORX" socket wrench (T30), remove the 3 screws.
b. Slide the front door lock assembly downward, pull out the front door lock open rod from the outside handle frame, and remove the front door
lock assembly and cables as a unit.
c. Remove the front door lock open rod from the front door lock assembly.
d. Remove the door lock wiring harness seal from the front door lock assembly.
e. Remove the front door lock remote control cable assembly.
f.
Using a screwdriver, disengage the 3 claws.
HINT: Tape the screwdriver tip before use.