ES 350 V6-3.5L (2GR-FE) (2007)
NOTE:
-
Do not push the terminals with your finger.
-
Do not forcibly pry up the battery (lithium battery) because doing so will deform the terminals.
-
Do not touch the battery with wet hands. Water may result in corrosion.
-
Do not touch or move any components inside the transmitter because handling the components may interfere with proper operation of the
transmitter.
INSTALLATION
1. INSTALL TRANSMITTER BATTERY
a. Install a new battery (lithium battery) with the positive (+) side up as given in the illustration.
b. Press down gently on the battery to set it in place.
NOTE:
-
Be sure that the positive and negative sides of the transmitter battery are positioned correctly.
-
Be careful not to bend the terminals of the transmitter battery during installation.
-
Keep the interior of the transmitter case free of dust, water and oil.
c. Install the cover by pressing down on it as given in the illustration.