ES 350 V6-3.5L (2GR-FE) (2007)
1. INSTALL PARKING BRAKE PEDAL ASSEMBLY
(a)
Install the parking brake pedal assembly with the bolt and 2 nuts.
Torque: 39 N*m (398 kgf*cm, 29 ft.*lbf)
(b) Connect the parking brake switch connector.
(c)
Install the No. 1 parking brake cable assembly to the body with the bolt, nut, and a new No. 1 parking brake cable clamp.
Torque:
Bolt 15 N*m (153 kgf*cm, 11 ft.*lbf)
Nut 5.4 N*m (55 kgf*cm, 48 in.*lbf)
(d) Using a brass bar and a hammer, install the clip to the No. 1 parking brake cable assembly.