ES 350 V6-3.5L (2GR-FE) (2007)
C.
Remove the 2 O-rings.
D.
Using a Torx socket wrench E8, remove the 2 stud bolts:
^
One on the timing cover.
^
One on the lower cylinder block.
13.
Remove the water pump assembly by removing the 16 bolts, water pump, and gasket.
14.
Remove the timing chain cover sub-assembly.
A.
Remove the 15 bolts and 2 nuts as shown.
B.
Remove the timing chain cover by prying between the timing chain cover and cylinder head or cylinder block with a taped screwdriver.
NOTE
Be careful NOT to damage the contact surfaces of the cylinder head, cylinder block, and chain cover.
C.
Remove the 4 bolts, chain cover plate, and gasket.