ES 350 V6-3.5L (2GR-FE) (2007)
E.
Hold the hexagonal portion of the camshaft with a wrench, and tighten the 2 bolts.
Torque: 100 N*m (1,020 kgf*cm, 74 ft*lbf)
F.
Remove the pin from the chain tensioner.
9.
Install the chain sub-assembly.
A.
Align the mark plate and timing marks as shown and install the chain.
HINT
The camshaft mark plate is orange.
B.
Do NOT pass the chain over the crankshaft at this time.