ES 350 V6-3.5L (2GR-FE) (2007)
/Page-506026.png)
B.10Apply seal packing in a continuous line as shown.
Seal packing:
Toyota Genuine Seal Packing Black, Three Bond 1207B, or equivalent
Seal diameter:
3.5 - 4.5 mm (0.138 - 0.177 in.)
NOTE
^
Remove any oil from the contact surface.
^
Install the camshaft housing sub-assembly RH within 3 minutes.
^
Do NOT start the engine for at LEAST 2 hours after installing.
C.
Install the camshaft housing LH and tighten the 13 bolts in the order shown.
Torque: 28 N*m (286 kgf*cm, 21 ft*lbf)
NOTE
