ES 350 V6-3.5L (2GR-FE) (2007)
NOTE
^
Be sure to clean and degrease the contact surfaces, especially the surfaces indicated by "C" in Figure 77.
^
When the contact surfaces are wet, wipe them with an oil-free cloth before applying seal packing.
^
Install the chain cover within 3 minutes.
^
Do NOT start the engine for at LEAST 2 hours after installing.
B.
Apply seal packing in a continuous line to the timing chain cover as shown below.
NOTE
^
When the contact surfaces are wet, wipe them with an oil-free cloth before applying seal packing.
^
Install the chain cover within 3 minutes and tighten the bolts within 15 minutes after applying seal packing.
^
Do NOT start the engine for at LEAST 2 hours after installing.