ES 350 V6-3.5L (2GR-FE) (2007)
Torque: 9.1 N*m (93 kgf*cm, 81 in*lbf)
15.
Install the water inlet housing.
A.
Install 2 NEW O-rings.
HINT
Apply a small amount of water or soapy water to O-ring "A" shown before installing it.
B.
Install the water inlet with the 2 bolts and nut.
Torque: 10 N*m (102 kgf*cm, 7 ft*lbf)
NOTE
Be careful that the O-ring does NOT get caught between the parts.