ES 350 V6-3.5L (2GR-FE) (2007)
(b) Remove the 8 bolts, front spacer, drive plate and rear spacer.
3. REMOVE ENGINE REAR OIL SEAL
(a)
Using a knife, cut off the oil seal lip.
(b) Using a screwdriver, pry out the oil seal.
NOTICE: Be careful not to damage the crankshaft.
HINT: Tape the screwdriver tip before use.
INSTALLATION
1. INSTALL ENGINE REAR OIL SEAL
(a)
Apply MP grease to a new oil seal lip.
(b) Using SST and a hammer, tap in the oil seal.
SST 09223-15030, 09950-70010 (09951-07150)
Oil seal tap in depth: -0.5 to 0.5 mm (-0.020 to 0.020 in.)