ES 350 V6-3.5L (2GR-FE) (2007)
8. REMOVE COOL AIR INTAKE DUCT SEAL
9. REMOVE ENGINE ROOM SIDE COVER LH
10. REMOVE ENGINE ROOM SIDE COVER RH
11. REMOVE AIR CLEANER CAP SUB-ASSEMBLY
12. REMOVE AIR CLEANER INLET SUB-ASSEMBLY
13. REMOVE NO. 1 AIR CLEANER INLET
14. REMOVE FRONT BUMPER ASSEMBLY
15. REMOVE FRONT BUMPER ENERGY ABSORBER
16. REMOVE MILLIMETER WAVE RADAR SENSOR ASSEMBLY (w/ Dynamic Radar Cruise Control System)
17. SEPARATE RADIATOR RESERVE TANK HOSE
18. DISCONNECT RADIATOR HOSE INLET
19. DISCONNECT RADIATOR HOSE OUTLET
20. DISCONNECT NO. 1 OIL COOLER INLET HOSE
21. DISCONNECT NO. 1 OIL COOLER OUTLET HOSE
22. REMOVE RADIATOR SUPPORT UPPER
23. DISCONNECT LIQUID TUBE SUB-ASSEMBLY
a. Remove the bolt and disconnect the liquid tube sub-assembly from the condenser.
b. Remove the O-ring from the liquid tube sub-assembly.
NOTE: Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.
24. DISCONNECT COOLER REFRIGERANT DISCHARGE PIPE
a. Remove the bolt and disconnect the cooler refrigerant discharge pipe from the condenser.
b. Remove the O-ring from the cooler refrigerant discharge pipe.
NOTE: Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.