ES 350 V6-3.5L (2GR-FE) (2007)
/Page-1384006.png)
a. Using pliers, install the cooler dryer to the modulator.
b. Apply sufficient compressor oil to an O-ring and cap fitting surface.
Compressor oil: ND-OIL 8 or equivalent
c. Using a straight hexagon wrench 14 mm, install the cap to the cooler condenser core.
Torque: 2.9 N.m (30 kgf.cm, 26 in.lbf)
2. INSTALL COOLER CONDENSER ASSEMBLY