ES 350 V6-3.5L (2GR-FE) (2007)
a. Disconnect the camshaft timing oil control valve connector.
b. Remove the bolt and camshaft timing oil control valve.
c. Remove the O-ring from the camshaft timing oil control valve.
INSTALLATION
1. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE (for Bank 2 Exhaust Side)
a. Apply a light coat of engine oil to a new O-ring and install it to the camshaft timing oil control valve.
b. Install the camshaft timing oil control valve with the bolt.
Torque: 10 N.m (102 kgf.cm, 7 ft.lbf)
NOTE: Make sure that the O-ring is not cracked or jammed when installing the oil control valve.
c. Connect the camshaft timing oil control valve connector.
2. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE (for Bank 2 Intake Side)