ES 350 V6-3.5L (2GR-FE) (2007)
1. Connect the SST connector to the rear seat side airbag assembly.
SST 09082-00770
e. Place the tires.
1. Place at least 2 tires under the tire which the rear seat side airbag assembly is tied to.
2. Place at least 2 tires over the tire which the rear seat side airbag assembly is tied to. The top tire should have the disc wheel installed.
NOTE:
-
The tire may be damaged by the airbag deployment, so use an extra tire.
-
Do not place the SST connector under the tire because it could be damaged.
3. Tie the tires together with 2 wire harnesses.
CAUTION: Make sure that the wire harness is tight. Looseness in the wire harness results in the tires coming free due to the
shock when the airbag is deployed.
f.
Install the SST.
1. Connect the SST connector.