ES 350 V6-3.5L (2GR-FE) (2007)
3. REMOVE FRONT DOOR SCUFF PLATE RH
4. REMOVE FRONT DOOR OPENING TRIM COVER RH
5. REMOVE SIDE INSTRUMENT PANEL RH
6. REMOVE INSTRUMENT PANEL FINISH PANEL END RH
7. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
8. REMOVE FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY
a. Remove the 3 bolts.
b. Disconnect the front passenger side knee airbag connector.
c. Disengage the 2 claws and 2 pins, and remove the front passenger side knee airbag assembly.
NOTE: When handling the airbag connector, take care not to damage the airbag wire harness.
INSTALLATION
1. INSTALL FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY