ES 350 V6-3.5L (2GR-FE) (2007)
a. Disengage the 6 claws and 2 pins, and remove the spiral cable from the steering angle sensor.
INSTALLATION
1. INSTALL SPIRAL CABLE
a. Engage the 6 claws and 2 pins, and install the spiral cable to the steering angle sensor.
2. INSTALL SPIRAL CABLE WITH STEERING ANGLE SENSOR
a. Check that the front wheels are facing straight ahead.
b. Set the turn signal switch to the neutral position.
NOTE: If it is not in the neutral position, the pin of the turn signal switch may be snapped.