ES 350 V6-3.5L (2GR-FE) (2007)
(c)
Install the vane pump plates with the round end facing outward.
NOTICE: Make sure that the vane pump plates are installed facing in the correct direction.
6. INSTALL VANE PUMP SHAFT SNAP RING
(a)
Using a screwdriver and a snap ring expander, install a new vane pump shaft snap ring onto the vane pump shaft with pulley.
NOTICE: Make sure that the vane pump shaft snap ring is securely installed in the vane pump shaft groove.
7. INSTALL VANE PUMP REAR HOUSING
(a)
Coat a new O-ring with power steering fluid and install it onto the vane pump rear housing.