ES 350 V6-3.5L (2GR-FE) (2007)
12. SEPARATE REAR NO. 1 SUSPENSION ARM LH
(a)
Remove the bolt, nut and the rear No. 1 suspension arm (outer side) from the rear axle carrier.
NOTICE: When removing the bolt, keep the nut from rotating.
13. SEPARATE REAR NO. 1 SUSPENSION ARM RH
HINT: Separate the RH side using the same procedures as for the LH side.
14. REMOVE REAR SUSPENSION MEMBER LOWER STOPPER LH
(a)
Remove the 2 nuts and the rear suspension member lower stopper LH.
15. REMOVE REAR SUSPENSION MEMBER LOWER STOPPER RH
(a)
Remove the 2 nuts and the rear suspension member lower stopper RH.
16. REMOVE REAR SUSPENSION MEMBER SUB-ASSEMBLY
(a)
Support the rear suspension member with a jack.