ES 350 V6-3.5L (2GR-FE) (2007)
24. REMOVE REAR SUSPENSION SUPPORT NO. 1 COVER
(a)
Remove the 4 claws and the rear suspension support No. 1 cover.
25. REMOVE REAR SHOCK ABSORBER WITH COIL SPRING
(a)
Loosen the lock nut of the rear shock absorber with coil spring.
NOTICE:
^
Do not remove the lock nut.
^
Only loosen the nut when disassembling the rear shock absorber with coil spring.
(b) Remove the 2 nuts and 2 bolts on the lower side of the rear shock absorber with coil spring.
NOTICE:
^
When removing the nuts, keep the bolts from rotating.
^
Keep one bolt inserted to secure the hub and disc rotor.
(c)
Remove the 3 nuts on the upper side of the rear shock absorber with coil spring.
(d) Lower the rear axle carrier, and remove the 2 bolts on the lower side of the rear shock absorber with coil spring.