ES 350 V6-3.5L (2GR-FE) (2007)
2. STABILIZE SUSPENSION
(a)
Jack up the rear axle carrier, placing a wooden block to avoid damage. Apply load to the suspension so that the installed bolt of the rear
suspension No. 1 arm (inner side of vehicle) is horizontally aligned with the center of the rear axle hub.
3. FULLY TIGHTEN REAR STRUT ROD
(a)
Fully tighten the bolt.
Torque: 113 N*m (1,152 kgf*cm, 83 ft.*lbf)
(b) Fully tighten the bolt.
Torque: 113 N*m (1,152 kgf*cm, 83 ft.*lbf)