ES 350 V6-3.5L (2GR-FE) (2007)
(b) Install the flexible hose and the speed sensor wire to the shock absorber with the bolt and set the clamp of the sensor on the knuckle.
Torque: 19 N*m (192 kgf*cm, 14 ft.*lbf)
NOTICE:
^
Be careful not to damage the speed sensor.
^
Prevent foreign matter from adhering to the speed sensor.
^
Do not twist the sensor wire when installing the speed sensor.
7. INSTALL FRONT STABILIZER LINK ASSEMBLY
(a)
Install the stabilizer link assembly with the nut.
Torque: 74 N*m (755 kgf*cm, 55 ft.*lbf)
HINT: If the ball joint turns together with the nut, use a hexagon wrench (6 mm) to hold the stud.
8. INSTALL FRONT AXLE HUB NUT
(a)
Using a socket wrench (30 mm), install a new axle hub nut.
Torque: 294 N*m (3,000 kgf*cm, 217 ft.*lbf)
(b) Using a chisel and hammer, stake the front axle hub nut.
9. INSTALL FRONT WHEEL
Torque: 103 N*m (1,050 kgf*cm, 76 ft.*lbf)
10. ADD AUTOMATIC TRANSAXLE FLUID
11. ADJUST FRONT WHEEL ALIGNMENT
12. CHECK ABS SPEED SENSOR SIGNAL