ES 350 V6-3.5L (2GR-FE) (2007)
HINT: When removing the moulding, make a partial cut, then pull and remove it by hand.
37. REMOVE WINDSHIELD MOULDING OUTSIDE RH (for Glass Roof)
a. Using a knife, cut off the moulding, as shown in the illustration.
NOTICE:
-
Do not damage the vehicle body with the knife.
-
If the vehicle body is damaged, repair the damaged portion by applying an anti-rust coating after removing the windshield glass.
b. Remove the remaining moulding from the windshield glass.
HINT: When removing the moulding, make a partial cut, then pull and remove it by hand.
38. REMOVE WINDSHIELD GLASS ASSEMBLY
NOTICE:
-
There are No. 1 and No. 2 stoppers on the windshield glass as shown in the illustration. Be careful not to damage the windshield glass when
cutting off the adhesive.
-
To prevent the windshield glass from dropping when performing this operation, be sure to hold the windshield glass using suction cups.
HINT: Depending on vehicles, a 1-piece or 2-piece type stopper is used.