ES 350 V6-3.5L (2GR-FE) (2007)
7. INSTALL WINDSHIELD MOULDING OUTSIDE RH (for Glass Roof)
HINT: Use the same procedures for the RH side and LH side.
8. INSTALL WINDOW GLASS ADHESIVE DAM
a. Using a brush or sponge, coat the application area of adhesive dam with Primer G.
NOTICE:
-
Do not apply too much primer.
-
Allow the primer coating to dry for 3 minutes or more.
-
Do not keep any of the opened Primer G for later use.
HINT: If an area other than that specified is coated by accident, wipe off the primer with a clean piece of cloth before it dries.
b. Install a new adhesive dam onto the windshield glass, as shown in the illustration.
9. INSTALL WINDSHIELD GLASS ASSEMBLY