GS 350 AWD V6-3.5L (2GR-FSE) (2009)
Removal
2GR-FSE COOLING: COOLING FAN MOTOR: REMOVAL
REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative battery terminal to prevent airbag and seat belt pretensioner
activation.
2. REMOVE COOL AIR INTAKE DUCT SEAL See: Engine/Service and Repair/Removal and Replacement/Engine Assembly/Removal
3. REMOVE ENGINE ROOM SIDE COVER RH See: Engine/Service and Repair/Removal and Replacement/Engine Assembly/Removal
4. REMOVE ENGINE ROOM SIDE COVER LH See: Engine/Service and Repair/Removal and Replacement/Engine Assembly/Removal