GS 350 AWD V6-3.5L (2GR-FSE) (2009)
/Page-2857004.png)
(a) Check the wire harness between the headlight (clearance LH) and engine room No. 2 junction block, and the headlight (clearance LH) and
body ground.
(1) Disconnect the 2G junction block connector.
(2) Disconnect the B11 headlight connector.
(3) Measure the resistance of the wire harness side connectors.
Standard resistance:
(b) Check the wire harness between the headlight (clearance RH) and engine room No. 2 junction block, and the headlight (clearance RH) and
body ground.
(1) Disconnect the 2G junction block connector.
(2) Disconnect the B2 headlight connector.
(3) Measure the resistance of the wire harness side connectors.
Standard resistance:
